Flooring Nailer for Hardwood Floors Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring
22:57 | 
Posted by
Chiquita Thee
Cheap Flooring Nailer for Hardwood Floors Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Shop |
Flooring Nailer for Hardwood Floors Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring OverviewFlooring Nailer for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The nail magazine holds 100 flooring nails, and nail length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The flooring nailer is used by placing it on the edge of a piece of hardwood flooring. The included mallet is then used to strike the actuator and fire the cleat nail in. The most difficult part of the process is just moving the flooring nailer around. Include in the kit is a Carrying Case, Flooring Nailer , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.Flooring Nailer for Hardwood Floors Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Features
you looking for cheaper Flooring Nailer for Hardwood Floors Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring? before decision to buy, I searches on internet so long time. So I gathered a shop that sells Flooring Nailer for Hardwood Floors Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring and compare prices to. Some shops offers me fast shipping. Now the prices down even more urgent look at all the other check prices before the end of time. |
 |
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools®
13:05 |
Posted by
Chiquita Thee
Best Cheap Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools® Online
you looking for cheaper Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools®?
before decision to buy, I searches on on line so long time. So I gathered a online shop that sells Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools® and compare prices to. Some online stores offers me fast shipping.
Now the prices down even more urgent look at all the other check prices before the end of time.
Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. Do a professional installation of your beautiful hardwood flooring faster and easier. Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption:4.5 CFM 4.5 CFM Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / Stapler Mallet Safety Glasses Air Tool Oil Base Plate S3 Hex Key S4 Hex Key S5 Hex Key Wrench-Special Instruction Manual.Operates with any standard compressor using pressure of 60 to 100 psi. High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!! The Hard Core Tools/SterlingTek name, images, and contents of this SterlingTek listing are protected by trademarks and copyrights. Copyright © 2008 SterlingTek.
- 2 in 1 Flooring Cleat Nailer / Stapler gun at fraction of the cost of a Bostitch Stapler!
- High speed pneumatic flooring cleat nailer/hardwood floor stapler lets you get the job done faster.
- Operates with any standard compressor between 60-100 PSI
- High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
- Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring
01:30 |
Posted by
Chiquita Thee
Save On Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Web Store
- Pneumatic flooring nailer Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
- Operates with any standard compressor between 60-100 PSI
- High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
- Non-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
- Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.
Pneumatic Flooring Nailer for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The nail magazine holds 100 floor nails, and nail length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The pneumatic flooring nailer is used by placing it on the edge of a piece of hardwood flooring. The included mallet is then used to strike the actuator and fire the nail in. The most difficult part of the process is just moving the pneumatic flooring nailer around. Include in the kit is a Carrying Case, Pneumatic Flooring Nailer , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.
you looking for low-priced Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring?
before decision to buy, I searches on online so long time. So I gathered a shop that sells Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring and compare prices to. Some online stores offers me fast shipping.
Now the prices down even more urgent look at all the other check prices before the end of time.This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Labels:
1015PXPU17BK,
101Inch,
Bamboo,
Black,
Brazilian,
Cherry,
Engineered,
Flooring,
Hardcore,
Hickory,
Maple,
Nailer,
Netbook,
Pneumatic,
Prefinished,
Scraped,
Tools,
Walnut
|
0
comments
Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler
16:01 |
Posted by
Chiquita Thee
Save On Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler Shop
- 2 in 1 Flooring Cleat Nailer / Stapler Light weight die-cast aluminum body. Colors may vary!
- Operates with any standard compressor using pressure of 60 to 100 psi.
- High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth.
- Non-marring adjustable base plates allows for 1/2 to 3/4 inch hardwood floor installation.
- We currently ONLY ship these TOOLS inside USA via fedex ground.
Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32".Technical Information:Minimum Operating Air Pressure: 60 PSI 4 barMaximum Operating Air Pressure: 100 PSI 7 barStaple Length Range: 1" - 2" 25.4 mm-50.8 mmStaple Size: 16 GuageStaple Capacity :92L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mmL-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100Air Inlet:1/4 inch NPT 6.35 mmAir Consumption:4.5 CFM 4.5 CFMPackage Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / StaplerMallet Safety GlassesAir Tool Oil Base PlateS3 Hex KeyS4 Hex KeyS5 Hex KeyWrench-SpecialInstruction Manual
you looking for cheaper Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler?
before decision to buy, I searches on on line so long time. So I gathered a shop that sells Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler and compare prices to. Some shops offers me fast shipping.
Now the prices down even more urgent look at all the other check prices before the end of time.This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Hardcore Tools® Dual HARDWOOD FLOORING AIR Flooring Cleat Nailer / Stapler Gun Kit
11:22 |
Posted by
Chiquita Thee
Discount Hardcore Tools® Dual HARDWOOD FLOORING AIR Flooring Cleat Nailer / Stapler Gun Kit Web Store
you looking for low priced Hardcore Tools® Dual HARDWOOD FLOORING AIR Flooring Cleat Nailer / Stapler Gun Kit?
before decision to buy, I searches on on line so long time. So I gathered a web store that sells Hardcore Tools® Dual HARDWOOD FLOORING AIR Flooring Cleat Nailer / Stapler Gun Kit and compare prices to. Some stores offers me fast shipping.
Now the prices down even more urgent look at all the other check prices before the end of time.
Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32".Technical Information:Minimum Operating Air Pressure: 60 PSI 4 barMaximum Operating Air Pressure: 100 PSI 7 barStaple Length Range: 1" - 2" 25.4 mm-50.8 mmStaple Size: 16 GuageStaple Capacity :92L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mmL-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100Air Inlet:1/4 inch NPT 6.35 mmAir Consumption:4.5 CFM 4.5 CFMPackage Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / StaplerMallet Safety GlassesAir Tool Oil Base PlateS3 Hex KeyS4 Hex KeyS5 Hex KeyWrench-SpecialInstruction Manual
- 2 in 1 Flooring Cleat Nailer / Stapler gun at fraction of the cost of a Bostitch Stapler! Light weight die-cast aluminum body. Hardened Driver Blade.
- Long reach handle for increased comfort and added control. Operates with any standard compressor using pressure of 60 to 100 psi. High-capacity magazine reduces reload time. Colors may vary!
- Non-marring adjustable base plates allows for 1/2 to 3/4 inch hardwood floor installation. Precisely drives staples at proper angle and depth
- We currently ONLY ship these TOOLS inside USA via fedex ground. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!!
- Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of PURCHASE.
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com